Low Operating cost due to high vacuum filtration
with rotary oil sealed pumps.
Available in Portable & Mobile versions.
Application
Oil transfer &
circulation system : The plants will have two pumps
for oil transfer and circulation. Both pumps will be positivedisplacement
gear type, directly coupled with electric motor. The plants
will have necessary valves and piping to ensure easy operation
and maintenance.
Heating System : The plants
will have an insulated heater chamber with indirect type bobbin
heater for heating of oil up to 80° C. However the working
temperature for filtration will be 55° C. Heater pipes
will be finned to have more efficient heat transfer. Temperature
will be controlled with thermostat or Digital Temperature
indicator cum controller.
Filtration System : The filtration
system is suitable for removing suspended particles such as
colloidal carbon, oxidation sludge, dirt, rust.
Degassing chamber and vacuum system
: The oil dispersed while passing through fine filter
will be sprayed on reaching ring tray to have an exposure
of oil film to vacuum, because of which moisture removal rate
will be increased. Degassing chamber will be evacuated with
rotary oil sealed vacuum pump moisture trap, valves, etc.
This plants are suitable for Hydraulic Oil
, Thermic Fluid, etc.
